NCAA Football 12 Custom Covers

**cjg225** · 07-13-2011, 05:30 PM

Originally Posted by BigDmo

Should be already done. The resolution is 300 however the actual size of the covers are the dimensions of the game case. I've seen countless posts about people having problems printing these however I have never had a problem. I always open my covers in Paint and print them from there. My covers have never had a problem printing because I don't mess with the size. However I can't speak for others who might accidentally mess with their template and screw up the print size.

Hmm. The Silas Redd cover from page 5 printed out HUGE when I opened it in Paint.

I got home a bit ago and measured the case cover, so tomorrow I'll try fiddling with the dimensions in Photoshop when I'm back on campus to make it fit.

**mpbulldog09** · 07-13-2011, 06:50 PM

u didnt get mine man haha but i dont really care

**BigDmo** · 07-13-2011, 07:35 PM

Originally Posted by cjg225

Hmm. The Silas Redd cover from page 5 printed out HUGE when I opened it in Paint.

I got home a bit ago and measured the case cover, so tomorrow I'll try fiddling with the dimensions in Photoshop when I'm back on campus to make it fit.

Yeah, not my cover so I don't know. You can find the dimensions online if you Google it.

**cjg225** · 07-13-2011, 08:15 PM

Originally Posted by BigDmo

Yeah, not my cover so I don't know. You can find the dimensions online if you Google it.

Tried that and couldn't seem to find the exact dimensions.

It seems like the cover is 10.75" wide by 5.875" tall. The spine is 0.5" wide and one page is 5.125" wide. I may be wrong, but that's what I could figure using a tape measure.

**bruinkid626** · 07-13-2011, 08:20 PM

Originally Posted by cjg225

Hmm. The Silas Redd cover from page 5 printed out HUGE when I opened it in Paint.

I got home a bit ago and measured the case cover, so tomorrow I'll try fiddling with the dimensions in Photoshop when I'm back on campus to make it fit.

It looks big in Paint when you open it, but when you open Print Preview it should be right.

**cjg225** · 07-13-2011, 08:39 PM

Originally Posted by bruinkid626

It looks big in Paint when you open it, but when you open Print Preview it should be right.

I printed it out already. It was way too big for the PS3 case.

**BigDmo** · 07-14-2011, 12:29 AM

Actually, go to page set up and make sure it isn't improperly scaled. Sometimes it glitches in paint.

**GatorBait06NC** · 07-14-2011, 05:01 AM

Id like one of Mike Gillislee, but this is the only good picture I could find. It may not be big enough.

**war jw eagle** · 07-14-2011, 10:38 AM

@GatorBait, def too small but I'll see what I can find. Got to make sure you took good care of Auburn in roster updates though, lol.

**Mike the V** · 07-14-2011, 01:46 PM

Don't know if this helps anyone who is having trouble printing or if its been discussed before, but I found this video detailing how to print in paint: http://www.youtube.com/watch?v=DGgKH...layer_embedded
Although it says for 360 it should be the same for PS3.

**Jvols** · 07-14-2011, 03:38 PM

Can you do one of Tauren Poole for ps3

**TcuFrog5** · 07-14-2011, 05:45 PM

can i get a Tcu one ?

or http://www.latimes.com/media/photo/2011-01/58546549.jpg

**TcuFrog5** · 07-14-2011, 05:52 PM

http://static.deseretnews.com/media/...1294039591.jpg

**TcuFrog5** · 07-14-2011, 05:55 PM

http://assets.sbnation.com/assets/46...LT_tribute.jpg

**BigDmo** · 07-14-2011, 08:52 PM

No need to make several posts with pictures that are too small. I have made a Dalton one already. Just look through my covers:

http://bigdmo.picturepush.com/album/...otball-12.html